Audio Technica AT4033aSM Condenser Microphone

AUDIO TECHNICA AT4033ASM MICROPHONE

The side-address Audio Technica AT4033aSM offers low-noise, symmetrical, transformerless circuitry that results in exceptional transient response and clean output signals. A strong up-front presence characterizes the sonic signature of this 40 Series pro-audio classic. The AT4033aSM's 80Hz high-pass filter easily switches between flat frequency response and a low-end roll-off that diminishes ambient noise and popping with closely-miked vocals.

AUDIO TECHNICA AT4033ASM MICROPHONE FEATURES

• A strong up-front presence characterizes the sonic signature of this versatile pro-audio classic
• Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
• Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
• The 2-micron-thick, vapor-deposited gold diaphragm undergoes a five-step aging process so that the optimum characteristics achieved remain constant over years of use
• Floating-construction capsule assembly provides isolation from noise and vibration
• Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
• State-of-the-art surface-mount electronics ensure compliance with Audio-Technica's stringent consistency and reliability standards
• Custom shock mount provides superior isolation

Specifications:

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Cardioid
• Frequency Response: 30-20,000 Hz
• Low Frequency Roll Off: 80 Hz, 12 dB/octave
• Open Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 Pa
• Impedance: 100 ohms
• Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
• Dynamic Range: 128 dB, 1 kHz at Max SPL
• Signal to Noise Ratio: 77 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 48V DC, 3.2 mA typical
• Weight: 13.4 oz (380 g)
• Dimensions: 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameter
• Output Connector: Integral 3-pin XLRM-type
• Accessories: AT8449 shock mount for 5/8"-27 threaded stands; protective carrying case

More information on the Audio Technica AT4033aSM microphone

Be the first to Write a Review for this item!

We aim to despatch all goods within 2-4 working days from the day the order is placed this allows us to offer the lowest carriage fees possible. If the item you have purchased is in stock we will process your order & despatch it right away. Once your order has been processed for despatch you will receive an e-mail which will contain a unique tracking number, you can track your parcel & you will know exactly when to expect your delivery. We use DPD (insured couriers) for all deliveries.

Currently shipping to:

UK Mainland, Northern Ireland, Ireland (Eire), Scottish Highland & Islands, Isles Of Mann / Wight

Channel Islands 

Belgium, Denmark, Finland, France, Germany, Greece, Italy, Netherlands, Portugal, Spain & Sweden

All shipping charges are generated automatically based on weight at check out, don't forget to select the correct shipping destination!. International buyers that fail to select their correct destination country may find their orders delayed significantly or even canceled until the correct shipping fee is paid in full.

If you don't see your country listed above contact us to obtain a shipping quote.